Product Details:
Minimum Order Quantity | 1 Piece |
Material To Be Coated | Stainless steel |
Brand | US Engineering |
Heating Mode | Heat Sources: - Electric - Gas (Natural or LPG) - Fuel Oil - Steam |
Air-Flow Direction | Horizontal Air Flow |
Country of Origin | Made in India |
Conveyorised Powder Coating Systems are designed for higher volume operations. Belt Conveyor , Chain-On-Edge conveyor and overhead conveyor are used in powder coating systems.
The most common type of conveyor for powder coating is the continuous speed overhead system. These systems use a conveyor drive to power the product through the system with a fixed or adjustable line speed. Proper design and construction are the first steps towards a successful and profitable powder coating system. Each powder coating system is uiniue in both design and application based on the specification the user provides to the powder equipment . The Conveyer in this case has a dual speed. For job coaters conveyorised plants with an oven having batch curing facility from one end and conveyor from another end are provided . Every plant is designed ot suit and optimize the production as per your requirement and production volumes.
Features:
· Fully automatic powder coating booth with automated recovery system for zero wastage using Multi-Cyclone or high efficiency single cyclone system.
· Conveyorized Powder curing ovens with electrical, oil fired or gas fired, heating option based on the requirements.
· Motorized conveyor system and free conveyor for material handling based on the requirements.
· Bag filter & cartridge filer options available.
· Automatic powder sprays application with reciprocators.
· Automatic powder recycling system and Powder Management using the latest technology.
· Conveyorised Powder Curing ovens with electrical, oil fired & gas fired heating options are available.
· Motorised as well as power & free conveyor for material handling as an option.
Offered Conveyorised Powder Coating Plant Include:
· Electrostatic Powder Coating Gun
· Powder Recovery Booth
· Poder Curing voen for oven
· Overhead Conveyor Systems
Power Source Options:
Main power supplies 415 Volt, 50Hz, 3 Phase , 4 Wire A.C System only.
Heat Sources:
· Electric
· Gas (Natural or LPG)
· Fuel Oil
· Steam
Other Fuel Mixtures
Additional Information:
Product Details:
Conveyor Type | Belt |
Capacity | 50 Kg/Feet |
Speed | 60 m/min |
Material | Mild Steel |
Automation Grade | Automatic |
Product Details:
Material | PVC |
Automation Grade | Automatic |
I Deal In | New and Second Hand |
Power | 3 HP |
Country of Origin | Made in India |
Product Details:
Brand | US Engineers |
Usage/Application | Curing |
Display | Digital |
Voltage | 380V |
Material | Mild Steel |
Display Type | Digital |
I Deal In | New Only |
Country of Origin | Made in India |
Product Details:
Application/Usage | Industrial |
Brand | US Engineers |
Material | Mild Steel |
Automation Grade | Automatic |
Design | Standard |
Voltage | 380V |
Product Details:
Type | Flexible Conveyors |
Length | 1-10 feet |
Capacity | 1-50 kg per feet |
Belt Width | 10-20 inch |
Material | Stainless Steel |
Condition | New |
Product Details:
Brand | US Engineers |
Usage/Application | Industrial |
Length | 10-20 feet |
Material Handling Capacity | 50-100 kg per feet |
Product Type | Conveyor |
Material | Stainless Steel |
Voltage | 380V |
I Deal In | New Only |
Country of Origin | Made in India |
Product Details:
Usage/Application | Assembly Lines |
Production Capacity | Standard |
Material | Mild Steel |
Color | White |
Country of Origin | Made in India |
Product Details:
Material | Stainless Steel |
Material Loading Capacity | 500-1500 kg |
Max Temperature (degree Celsius) | 500-1000 degree Celsius |
Driven Type | Electric |
Country of Origin | Made in India |
Product Details:
Type | Belt |
Application/Usage | Industrial |
Automation Grade | Automatic |
Length | 10-20 feet |
Material | Stainless Steel |
Capacity | 1-50 kg per feet |
Voltage | 380V |
Is It Customised | Yes |
Speed Adjustable | Yes |
Country of Origin | Made in India |
Product Details:
Type | Conveyor |
Automation Grade | Automatic |
Capacity | 50-100 kg per feet |
Operating Speed | 0-1 m/s |
Length | 10-20 feet |
Brand | US Engineers |
Deal In | New Only |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 1 Piece |
Color | Green |
Material | MS |
Application | For AC Coils, Painting, Automobiles, Metal Industries, Furnitures etc. |
Size of the working chamber | As per client requirement |
Country of Origin | Made in India |
Product Details
This is a belt conveyor oven consisting of various zones where variable/same temperature can be maintained in different zones of the oven. Common or individual control panels can be provided on each zone. Air circulation for uniform temperature is provided by fans/blowers in each zone. The jobs are placed on the belt one loading side of the oven & Unloaded form the other side.
Product Description
Construction: The oven is made out of Mild steel or stainless steel sheets from both inside and outside or mild steel from outside and stainless/G.I sheets from inside. The oven is duly painted with enamel paint giving a rich look from outside. The body is fully insulated with mineral wool to minimize the heat losses and the thickness of the wall varies from 50mm to 200mm depending on the maximum working temperature of the oven.
Choice of Air Circulation: Vertical, horizontal or combination
Heating Media: Electric
Temperature Range: Ambient to 500 °C
OPTIONAL FEATURES
Temperature Controller: PID with or without temp. profiling (ramp & soak)can be provided with SSR/ SCR for optimum accuracy. The programming of PID can vary form 4 programmes to 99 programmes.
Safety/blind Temperature Control: Digital/ Analog temperature controller can be provided for safety. It acts as a backup & does not allow temperature to shoot up in case the main temperature controller fails to operate.
Conveyor speed control: variable frequency drive is to increase or decrease the speed of the conveyor.
Temperature Recorder: TO monitor the uniformity of temperature at different points at the same time, Microprocessor based multi-point strip chart or paper less, Temp. Indicator cum
Recorder can be incorporated with the system. Automatic Exhaust System: Automatic forced exhaust system with or without timer is use for materials which produce vapors in high volume.
Doors: Insulated adjustable doors can be provided to minimize the heat losses at both entry and the exit side of the oven. These doors can be the screw type manually operate or can be fully automated system, the door closes as soon as the product clears the door and-re-opens when the product approaches the oven.
Servicing windows: To ease in accessibility, for the servicing and maintenance, Windows can be provided on different areas of the machine.
Door switch: Door interlocking system with the conveyor system can be provided in case of automated door and servicing windows.
Automatic Loading & Unloading: UMA SHANKAR ENGINEERS provides automatic loader & unloader of components on the conveyor system.
Heater Failure Indicator: Particular heater can be easily identified whether it is working condition or not. If damaged can be easily replaced in a very short span.
Product Sensing Device: A sensor with output alarm can be provided to sense the component at the unloading area so that it does not fall down from the conveyor.
PLC with HMI/MMI: PLC can be provided for automaton and integration of the whole system, data feeding, process display and fault indication can be seen in MMI.
Specifications:
. Application: For AC Coils, Painting, Automobiles, Metal Industries, Furnitures etc.
. Size of the working chamber: As per client requirement.
. Material of Construction: Mild Steel, Stainless Steel 304/316, GI.
. Temperature Ranfe: Ambient to to 150°C / 250 °C/400 °C/500 °C
. Air Circulation: Vertical, Horizontal or Combination.
. Timer: Digital Pre-Settable with range up to 0-999 minutes / seconds.
. Powder supply: 415 Volts 3 Phase 50Hz/60 Hz.
. Heating Media: Electrical
. Heating Elements: Low Wattage SS Tubular.
. Insulation: Ceramic Wool/ Mineral Wool
Product Details:
Minimum Order Quantity | 1 Piece |
Capacity(Kg) | 500 kg |
Air-Flow Direction | Vertical Down Airflow, Horizontal Air Flow, Duel Air Flow |
Display | Digital |
Color | Blue |
Material | MS |
Heating Media | Gas Fired, Diesel fired, Electrical |
Country of Origin | Made in India |
Product Details
This is a belt conveyor oven consisting of various zones where variable/same temperature can be maintained in different zones of the oven.
Common or individual control panels can be provided on each zone. Air circulation for uniform temperature is provided by fans/blowers in each zone. The jobs are placed on the belt on the loading side of the oven & unloaded form the other side.
Product Description
Construction: The oven is made out of Mild steel or stainless steel sheets from both inside and outside or mild steel from outside and stainless G.I sheets from inside. The oven is duly painted with Enamel Paint giving a rich look from outside. The body is fully insulated with mineral wool to minimize the heat losses and the thickness of the wall varies from 50mm to 200mm depending on the maximum working temperature of the oven.
Choice of Air circulation: Vertical, horizontal or combination
Heating Media: Electric
Temperature Range: Ambient to 500 °C
OPTIONAL FEATURES
Temperature controller: PID with or without temp. Profiling (ramp & soak) can be provided with SSR/SCR for optimum accuracy. The programming of PID can vary from programmes to 99 programmes.
Sefety/Blind Temperature Control: Digital/Analog temperature controller can be provided for safety. It acts as a backup & does not allow temperature to shoot up in case the main temperature controller fails to operate.
Conveyor speed control: Variable frequency drive is to increase or decrease the speed of the conveyor.
Temperature Recorder: To monitor the uniformity of temperature at different points at the same time, Microprocessor based multi-point strip chart or paper less, Temp. Indicator cum Recorder can be incorporated with the system.
Automatic Exhaust System: Automatic forced exhaust system with or without timer is used for materials which produce vapors in high volume.
Doors. Insulated adjustable doors can be provided to minimize the heat losses at both entry and exit side of the oven. These doors can be the screw type manually operated or can be fully automated adjustable doors. In the case of an automated system, the door closes as soon as the product clears the door and re-opens when the product approaches the oven.
Servicing Windows: To ease in accessibility, for the servicing and maintenance, Windows can be provided on different areas of the machine.
Door switch: Door interlocking system with the conveyor system can be provided in case of automated door and servicing windows.
Automatic Loading & Unloading: UMA SHANKAR ENGINEERS provides automatic loader & unloader of components on the conveyor system.
Heater Failure Indicator: Particular heater can be easily identified whether it is working condition or not. If damaged can be easily replaced in a very short span.
Product Sensing Device: A sensor with output alarm can be provided to sense the component at the unloading area so that it does not fall down from the conveyor.
PLC With HMI/MMI: PLC can be provided for automation and integration of the whole system, data deeding, process display and fault indication can be seen in MMI.
SPECIFICATIONS:
. Application: For AC Coils, Painting, Automobiles, Metal Industries, Furniture’s etc.
. Size of the working chamber: As per client requirement .
. Material of Construction: Mild Steel, Stainless Steel 304/3016, GI.
. Temperature Range: Ambient to 150°C / 250 °C/400 °C/500 °C
. Air Circulation: Vertical, Horizontal or Combination.
. Timer: Digital Pre-Settable with range up to 0-999 minutes/ seconds.
. Power Supply: 415 Volts 3 Phase 50Hz /60 Hz.
.Heating Media: Electrical.
. Heating Elements: Low Wattage SS Tubular.
Additional Information: